Fresnel lens Ø 112 for LED 1000 and LED 1400 series
Product information "Fresnel lens Ø 112 for LED 1000 and LED 1400 series "
Compatible with:DF-, HF-, LED 1000, LED 1400 ModelleDF, HF, LED 1000, LED 1400 models
If the Fresnel lens (Ø 112 mm) is damaged, it can be replaced.
Always disconnect the light from the power supply before removing the front plate.
Remove the four screws (6 x 16 mm) on the front plate and detach it.
Loosen the four fastening screws with lock washers and nuts, then remove the damaged Fresnel lens.
Insert the new Fresnel lens and securely fasten it with the screws.
Reattach the front plate.
If the Fresnel lens (Ø 112 mm) is damaged, it can be replaced.
Always disconnect the light from the power supply before removing the front plate.
Remove the four screws (6 x 16 mm) on the front plate and detach it.
Loosen the four fastening screws with lock washers and nuts, then remove the damaged Fresnel lens.
Insert the new Fresnel lens and securely fasten it with the screws.
Reattach the front plate.
No properties
Hersteller/Manufacturer:
Verantwortliche Person/Responsible f. Product Safety:
HEDLER Systemlicht GmbH
Heerstraße 112
65594 Runkel
E-Mail: info@hedler.com