Slot nut with screws
Product information "Slot nut with screws "
The guide block comes complete with two screws (M4x6) and an M4 nut.
To replace, loosen the light bracket with a 2.5 mm hex key, remove the old guide block, and secure the new one using a 5 mm hex key and an M8 socket wrench.
Compatible with the following models: DX-, DF-, F-, H-, HF-, LEDs
To replace, loosen the light bracket with a 2.5 mm hex key, remove the old guide block, and secure the new one using a 5 mm hex key and an M8 socket wrench.
Compatible with the following models: DX-, DF-, F-, H-, HF-, LEDs
No properties
Hersteller/Manufacturer:
Verantwortliche Person/Responsible f. Product Safety:
HEDLER Systemlicht GmbH
Heerstraße 112
65594 Runkel
E-Mail: info@hedler.com